Emerald Air Starters & Equipment
TOKU Flux Chippers & Needle Scalers
TOKU Flux Chippers & Needle Scalers are compact & handy with precision heat treated needles for maximum performance. Can be used for removing slag after welding, sand removal from molds, paint removal & concrete removal from brick work.
- TOKU Flux Chippers & Needle Scalers (N-200, TN-300H, TFC-200, TFC-300H)
- Weld flux chipper can be converted into needle scaler by adding needle scaler attachment (each 200 series & 300 series)
- 5/64″ (3mm) diameter needles as standard for N-200 & 1/8″ (2mm) needles is also available for N-200
- Effective in removing old paint & rust in difficult corners
- Compact & lightweight body for comfortable operation
- Simple valve design for precise throttle control
| Model | Length | Weight | Piston Stroke | Impact Rate | Air Inlet | Bore | Ave. Air Consumption |
| N-200 | 225 mm | 1.1 kg | 12 mm | 12,000 / min | 1/4″ NPT | 3/4″ | 9 cfm |
| TN-300H | 571 mm | 4.3 kg | 39 mm | 4500 / min | 3/8″ NPT | 1″ | 18 cfm |
| TFC-200 | 182 mm | 0.9 kg | 12 mm | 12,000 / min | 1/4″ NPT | 3/4″ | 9 cfm |
| TFC-300H | 571 mm | 4.3 kg | 39 mm | 4500 / min | 3/8″ NPT | 1″ | 18 cfm |
TOKU Flux Chippers & Needle Scalers are used for removing slag after welding, sand removal from molds, paint removal & concrete removal off brick work
